China Hot selling Hydraulic Orbit Motor OMR100 for Agricultural Machinery wholesaler

Product Description

                             OMR series hydraulic motor
OMR series motor adopt the advanced Gerolor gear set design with shaft distribution flow, which can automatically
compensate in operating with high pressure,provide reliable and smooth operation, high efficiency and long life.
Characteristic features:  
Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth,
reliable operation and high efficiency
   *Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
   *Special design in the driver-linker and prolong operating life.
   *Special design for distribution system can meet the requirement of low noise of unit.
   *Compact volume and easy installation.

  2: 2-Ø13.5Rhomb-flange, pilot Ø82.5×8
  4: 4-Ø13.5Rhomb-flange, pilot Ø82.5×8
  H4: 4-3/8-16 Square-flange, pilot Ø44.4×2.8
  H5: 4-M10 Square-flange, pilot Ø44.4×2.8

 A: Shaft Ø25,parallel Key 8x7x32
 C: Shaft Ø25.4,parallel Key 6.35×6.35×31.75
 E: Shaft Ø25.4,splined tooth SAE 6B
 R: Short shaft Ø25.4,parallel key 6.35×6.35×31.75
 B: Shaft Ø32,parallel Key 10x8x45
 F: Shaft Ø31.75,splined tooth 14-DP12/24
 FD: Long shaft Ø31.75,splined tooth 14-DP12/24
 G: Shaft Ø31.75,parallel Key 7.96×7.96×31.75
 T: Cone-Shaft Ø28.56,parallel Key B5x5x14

Ports and Drain Port:
  D: G1/2 Manifold Mount 4-M8, G1/4 
  M: M22×1.5 Manifold Mount 4-M8, M14×1.5
  S: 7/8-14 O-ring manifold 4-5/16-18UNC, 7/16-20UNF
  P: 1/2-14 NPTF Manifold 4-5/16-18UNC, 7/16-20UNF
  R: PT(Rc)1/2 Manifold 4-M8, PT(Rc)1/4

Applications: Any need for high torque, low speed applications. For example:
– Sprinkler
– Mini excvavtor
– Driven scraper conveyor
– Screw
– Baler
– hydraulic Winch
– Fishing boat
-Municipal machinery, agriculture, forestry and construction equipment etc…

Packing details:
1, sale packing contians carton or wood case
2, interior packing is high quality film
3, as your requests

Payment terms:
1, Small amount accept Paypal
2, Western Union
3, Large orders We usually accept T/T(with 30% deposit, the balance before shipment)
My friends, if you are interested in our hydraulic motor OMR. Pls send me enquiry!

Customer Service:
1)sample service: Samples can provide preferential.
2)customized services: A variety of motors can be customized according to customer demand.
3)aftermarket service: According to consumer requirements, technical guidance on the use and other aspects. In case
of quality problems under normal use, free replacement within 1 year of free maintenance for life.

My friends,
We also provide hydraulic motors such as OMM, OMP, OMR, OMS, OMT, OMV, OZ, OK, OM1, OM2, OM3, OM4, OMH, OMJ.
Vane pumps such as PV2R series, V series and VQ series, SQP series.
All these products are standard, best quality. If you are interested in any 1 of this products, don’t hesitate to contact me.

Landy Huang
Cell: 13558032097
Thank you! Hope you have a happy life!

Type  O MR




















Displacement (cc/rev) 36 51.7 81.5 102 127.2 157.2 194.5 253.3 317.5 381.4
Max speed

 rate (rpm)


cont 1085 960 750 600 475  378 310 240 190 155
int 1220 1150 940 750 600 475 385 300 240 190
Max  torque


cont 72 100 195 240 300 360 360 390 390 365
int 83 126 220 280 340 430 440 490 535 495
Max  output


cont 8.5 9.5 12.5 13.0 12.5 12.5 10.0 7.0 6.0 5.0
int 9.8 11.2 15.0 15.0 14.5 14.0 13.0 9.5 9.0 8.0
Max  pressure

Drop( Mpa)

cont 14.0 14 17.5 17.5 17.5 16.5 13 11 9 7
int 16.5 17.5 20 20 20 20 17.5 15 13 10


cont 40 50 60 60 60 60 60 60 60 60
int. 45 60 75 75 75 75 75 75 75 75
Weight(kg) 6.5 6.7 6.9 7 7.3 7.6 8.0 8.5 9.0 9.5

The Functions of Splined Shaft Bearings

Splined shafts are the most common types of bearings for machine tools. They are made of a wide variety of materials, including metals and non-metals such as Delrin and nylon. They are often fabricated to reduce deflection. The tooth profile will become deformed with time, as the shaft is used over a long period of time. Splined shafts are available in a huge range of materials and lengths.


Splined shafts are used in a variety of applications and industries. They are an effective anti-rotational device, as well as a reliable means of transmitting torque. Other types of shafts are available, including key shafts, but splines are the most convenient for transmitting torque. The following article discusses the functions of splines and why they are a superior choice. Listed below are a few examples of applications and industries in which splines are used.
Splined shafts can be of several styles, depending on the application and mechanical system in question. The differences between splined shaft styles include the design of teeth, overall strength, transfer of rotational concentricity, sliding ability, and misalignment tolerance. Listed below are a few examples of splines, as well as some of their benefits. The difference between these styles is not mutually exclusive; instead, each style has a distinct set of pros and cons.
A splined shaft is a cylindrical shaft with teeth or ridges that correspond to a specific angular position. This allows a shaft to transfer torque while maintaining angular correspondence between tracks. A splined shaft is defined as a cylindrical member with several grooves cut into its circumference. These grooves are equally spaced around the shaft and form a series of projecting keys. These features give the shaft a rounded appearance and allow it to fit perfectly into a grooved cylindrical member.
While the most common applications of splines are for shortening or extending shafts, they can also be used to secure mechanical assemblies. An “involute spline” spline has a groove that is wider than its counterparts. The result is that a splined shaft will resist separation during operation. They are an ideal choice for applications where deflection is an issue.
A spline shaft’s radial torsion load distribution is equally distributed, unless a bevel gear is used. The radial torsion load is evenly distributed and will not exert significant load concentration. If the spline couplings are not aligned correctly, the spline connection can fail quickly, causing significant fretting fatigue and wear. A couple of papers discuss this issue in more detail.


There are many different types of splined shafts. Each type features an evenly spaced helix of grooves on its outer surface. These grooves are either parallel or involute. Their shape allows them to be paired with gears and interchange rotary and linear motion. Splines are often cold-rolled or cut. The latter has increased strength compared to cut spines. These types of shafts are commonly used in applications requiring high strength, accuracy, and smoothness.
Another difference between internal and external splined shafts lies in the manufacturing process. The former is made of wood, while the latter is made of steel or a metal alloy. The process of manufacturing splined shafts involves cutting furrows into the surface of the material. Both processes are expensive and require expert skill. The main advantage of splined shafts is their adaptability to a wide range of applications.
In general, splined shafts are used in machinery where the rotation is transferred to an internal splined member. This member can be a gear or some other rotary device. These types of shafts are often packaged together as a hub assembly. Cleaning and lubricating are essential to the life of these components. If you’re using them on a daily basis, you’ll want to make sure to regularly inspect them.
Crowned splines are usually involute. The teeth of these splines form a spiral pattern. They are used for smaller diameter shafts because they add strength. Involute splines are also used on instrument drives and valve shafts. Serration standards are found in the SAE. Both kinds of splines can also contain a ball bearing for high torque. The difference between the 2 types of splines is the number of teeth on the shaft.
Internal splines have many advantages over external ones. For example, an internal spline shaft can be made using a grinding wheel instead of a CNC machine. It also uses a more accurate and economical process. Furthermore, it allows for a shorter manufacturing cycle, which is essential when splining high-speed machines. In addition, it stabilizes the relative phase between the spline and thread.

Manufacturing methods

There are several methods used to fabricate a splined shaft. Key and splined shafts are constructed from 2 separate parts that are shaped in a synchronized manner to transfer torque uniformly. Hot rolling is 1 method, while cold rolling utilizes low temperatures to form metal. Both methods enhance mechanical properties, surface finishes, and precision. The advantage of cold rolling is its cost-effectiveness.
Cold forming is 1 method, as well as machining and assembling. Cold forming is a unique process that allows the spline to be shaped to the desired shape. The resulting shape provides maximum contact area and torsional strength. Standard splines are available in standard sizes, but custom lengths can also be ordered. CZPT offers various auxiliary equipment, such as mating sleeves and flanged bushings.
Cold forging is another method. This method produces long splined shafts that are used in automobile propellers. After the spline portion is cut out, it is worked on in a hobbing machine. Work hardening enhances the root strength of the splined portion. It can be used for bearings, gears, and other mechanical components. Listed below are the manufacturing methods for splined shafts.
Parallel splines are the simplest of the splined shaft manufacturing methods. Parallel splines are usually welded to shafts, while involute splines are made of metal or non-metals. Splines are available in a wide variety of lengths and materials. The process is usually accompanied by a process called milling. The workpiece rotates to produce the serrated surface.
Splines are internal or external grooves in a splined shaft. They work in combination with keyways to transfer torque. Male and female splines are used in gears. Female and male splines correspond to 1 another to ensure proper angular correspondence. Involute splines have more surface area and thus are stronger than external splines. Moreover, they help the shaft fit into a grooved cylindrical member without misalignment.
A variety of other methods of manufacturing a splined shaft can be used to produce a splined shaft. Spline shafts can be produced using broaching and shaping, 2 precision machining methods. Broaching uses a metal tool with successively larger teeth to remove metal and create ridges and holes in the surface of a material. However, this process is expensive and requires special expertise.


The splined shaft is a mechanical component with a helix-like shape formed by the equal spacing of grooves in a circular ring. The splines can either have parallel or involute sides. The splines minimize stress concentration in stationary joints and can be used in both rotary and linear motion. In some cases, splines are rolled rather than cut. The latter is more durable than cut splines and is often used in applications requiring high strength, accuracy, and smooth finish.
Splined shafts are commonly made of carbon steel. This alloy steel has a low carbon content, making it easy to work with. Carbon steel is a great choice for splines because it is malleable. Generally, high-quality carbon steel provides a consistent motion. Steel alloys are also available that contain nickel, chromium, copper, and other metals. If you’re unsure of the right material for your application, you can consult a spline chart.
Splines are a versatile mechanical component. They are easy to cut and fit. Splines can be internal or external, with teeth positioned at equal intervals on both sides of the shaft. This allows the shaft to engage with the hub around the entire circumference of the hub. It also increases load capacity by creating a constant multiple-tooth point of contact with the hub. For this reason, they’re used extensively in rotary and linear motion.
Splined shafts are used in a wide variety of industries. CZPT Inc. offers custom and standard splined shafts for a variety of applications. When choosing a splined shaft for a specific application, consider the surrounding mated components, torque requirements, and size requirements. These 3 factors will make it the ideal choice for your rotary equipment. And you’ll be pleased with the end result!
There are many types of splines and their applications are endless. They transfer torque and angular misalignment between parts, and they also enable the axial rotation of assembled components. Therefore, splines are an essential component of machinery and are used in a wide range of applications. This type of shaft can be found in various types of machines, from household appliances to industrial machinery. So, the next time you’re looking for a splined shaft, make sure you look for a splined one.

China Hot selling Hydraulic Orbit Motor OMR100 for Agricultural Machinery     wholesaler China Hot selling Hydraulic Orbit Motor OMR100 for Agricultural Machinery     wholesaler

Recent Posts